Other
15
Restoring to the factory settings
When you want to delete all pairing device information, etc., you can restore the unit to the factory settings
(original settings upon purchase). Charge the battery before restoring the unit.
1
While the unit is turned off, press and hold [ ] for at least 5 seconds until the LED starts
blinking alternately in blue and red.
2
While the LED is blinking alternately in blue and red, press and hold [+] and [–] at the
same time for at least 5 seconds.
• The LED will blink fast in blue. The unit will restore to the factory settings.
∫
Attention
• When pairing a device again, delete the registering information (Device: “RP-BTS35”) from the Bluetooth
®
device’s
menu, and register this unit with the Bluetooth
®
device again. (
Copyright, etc.
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective owners.
Other system names and product names appearing in this document are in general the registered
trademarks or trademarks of the respective developer companies.
Note that the
TM
mark and ® mark do not appear in this document.