Operation
11
Making a phone call
With Bluetooth
®
enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth
®
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way communication using the
microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls function.
(This unit does not have a function that allows you to make phone calls independently of a Bluetooth
®
enabled
phone.)
1
Connect the Bluetooth
®
device and the unit. (
l
8, “Connecting a Bluetooth
®
device”)
2
Press [
] on the unit and answer the incoming call.
• During an incoming call, ringtone will sound from the speaker and the LED
will blink.
• (HFP only) To reject the incoming call, press [
] twice quickly.
3
Start talking.
• The LED will repeatedly blink 2 times during a call.
• The volume can be adjusted during a phone call. For setting instructions, see page 10.
4
Press [
] to end the phone call.
• A beep will sound.
Note
• There may be instances when hands free setting needs to be done on the Bluetooth
®
enabled phone.
• Depending on the Bluetooth
®
enabled phone, you may hear incoming and outgoing call ringtones of the phone from
the unit.
• (HFP only) The calling device will be switched between the Bluetooth
®
enabled phone and the unit. (Press [
]
on the unit twice quickly to switch.)
• You can have the Bluetooth
®
enabled phone make phone calls by using the microphone of the unit and an app of the
Bluetooth
®
enabled phone. (
l
12, “Activating a voice control function”)
[
]
