Other
13
Restoring to the factory settings
When you want to delete all pairing device information, etc., you can restore the unit to the factory settings
(original settings upon purchase). Charge the battery before restoring the unit.
1
While the unit is turned off, press and hold [
Í
/I ( )] for at least 5 seconds until the LED
starts blinking alternately in blue and red.
2
While the LED is blinking alternately in blue and red, press and hold [+ (
9
)] and
[– (
:
)] at the same time for at least 5 seconds.
• The default settings will be restored after the LED (blue) blinks fast and the unit turns off.
∫
Attention
• When pairing a device again, delete the registering information (Device: “RP-HTX80B”) from the Bluetooth
®
device’s
menu, and register this unit with the Bluetooth
®
device again. (
l
8)
Copyright, etc.
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Panasonic Corporation is under license.
Other trademarks and trade names are those of their respective owners.
Other system names and product names appearing in this document are in general the registered
trademarks or trademarks of the respective developer companies.
Note that the
TM
mark and ® mark do not appear in this document.
