background image

Other

15

Sound from the device is cut off. / Sound quality is bad.

• Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc.
• The device may be out of the 10 m communication range. Move the device closer to this unit.
• Remove any obstacle between this unit and the device.
• Switch off any wireless LAN device when not in use.
• A communication problem may arise if the battery is not fully charged. Charge the unit. (

l

7)

You cannot hear the other person.

• Make sure that the unit and the Bluetooth

®

 enabled phone are turned on.

• Check if the unit and the Bluetooth

®

 enabled phone are connected. (

l

8)

• Check the audio settings of the Bluetooth

®

 enabled phone. Switch the calling device to the unit if it is set to the 

Bluetooth

®

 enabled phone. (

l

8)

• If the volume of the other person’s voice is too low, increase the volume of both the unit and the Bluetooth

®

 enabled 

phone.

Cannot make a phone call.

• Check if the Bluetooth

®

 compatible device supports “HSP” or “HFP” profile. For details on profiles, see “Listening to 

music” (

l

10) and “Making a phone call” (

l

11). Also refer to the operating manual for the Bluetooth

®

 enabled 

phone.

Phone Calls

Summary of Contents for RP-HTX80B




















Reviews: