VQT3T13
13
Preparation/Basic Operations
• Turn the power on. (
➜
page 9)
• Press [
g
STOP/RETURN] to stop the unit.
1
Press [F2 (FOLDER)].
2
Press
u
,
i
to select the
recording
destination folder
and press [
q
OK]
to enter.
For microphone recording, select a folder
among folders “A”, “B”, “C” and “D”. (The
factory setting is “A”)
When you select a folder except for “A”, “B”,
“C” or “D”, recording is automatically saved
in “A”.
*
You can select preset recording settings registered in advance according to the recording target.
(
➜
page 18)
*
Change the recording mode or microphone sensitivity as necessary. (
➜
pages 20, 21)
*
If the file size exceeds 2 GB during recording, the recording stops tentatively at the point when the
data reaches 2 GB. Then, the recording resumes with a new file. Recording is not available during
the interval (approx. 2 seconds) from when the recording stops to when the recording resumes.
*
Note if your finger or an object touches this unit during recording, the noise will be recorded
through the microphone.
3
Press [
*
REC] (Recording starts).
STOP
REC
RETURN
The recording indicator
lights on.
4
Press [
g
STOP/RETURN] to stop
recording.
To pause recording:
1
Press [
*
REC] during recording.
Recording indicator blinks.
2
Press [
*
REC] again to resume recording.
Recording
*
REC
LIST
g
STOP/RETURN
F1 F2
VQT3T13̲RR-XS410̲400-PP̲En.indd 13
VQT3T13̲RR-XS410̲400-PP̲En.indd 13
2011/06/22 18:35:19
2011/06/22 18:35:19