21
To
learn more... / Cleaning instructions
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see nanoe-G indicator blinks or
error code “H99”. Please consult authorised
dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium
fi
n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap ( pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
nanoe-G Generator
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air
fi
lters
Once every 2 weeks
• Wash/rinse the
fi
lters gently
with water to avoid damage
to the
fi
lter surface.
• Dry the
fi
lters thoroughly under shade, away
from
fi
re or direct sunlight.
• Replace any damaged
fi
lters.
Remove air
fi
lter
Attach air
fi
lter
Insert into the unit
Indoor unit
Wipe the unit gently with a
soft, dry cloth.
Coils and fans should be clean
for at least every 6 months by an
authorised dealer.
Outdoor unit
Clear debris that surround the unit.
Clear any blockage from drain pipe.
Front panel
Wash gently and dry.
Remove the front panel
1 Release the
hooks at
both ends
2
Pull out and lift up
Close it securely
1
Insert
at both
sides
2
Push in
3
Close down
4 Press both ends and center of the front panel
English
Aluminium
fi
n
Front panel
Air
fi
lters
nanoe-G Generator
ACXF55-17040_SS0218-0.indb 21
ACXF55-17040_SS0218-0.indb 21
18/12/2017 3:16:35 PM
18/12/2017 3:16:35 PM
