14
RQT0A04
Choose a placement method that suits you best.
∫
When placing the main unit in front of the TV
The main unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic
Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D
compatible TV.
≥
If interference occurs, move the main unit further away from the TV. If the TV still does not function
correctly, try using it in a rack or in the wall mount position.
∫
If the TV’s remote control sensor is blocked by the main unit
Try using the TV’s remote control from a different angle. If the problem persists, you can use the supplied
IR Blaster to relay the signal to the TV. (
>
11, 12)
≥
Place the active subwoofer within a few meters of the main unit and in a horizontal position with the top panel facing upward.
≥
Do not use the main unit or the active subwoofer in a metal cabinet.
≥
Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with
thick curtains.
≥
If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the main unit and active
subwoofer further away from the TV.
≥
Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if placed too close to the main unit and active
subwoofer.
Selecting the placement method
When placing the main unit
in a rack or on a table
≥
Place the main unit on a flat
and horizontal surface.
When attaching the main
unit to a wall
≥
Place the main unit on a
flat and vertical surface.
Page 15
Page 16
SC-HTB485-EGEBGN_RQT0A04-B.book 14 ページ ２０１５年１月２２日 木曜日 午前１０時１５分
