Panasonic S-ics Technical Manual Download

Page: 13 / 327

S-ICX-64-700

S-ICX (International) issued April 2002

Chapter 1. About This Manual

If you are using this manual for a single System, make note of its software version in the following

table. This information may be referenced by technicians or owners of the System.

Organization

This manual contains detailed descriptions of features. The feature descriptions are organized
according to the following categories:

* See Appendix B

Software version information for systems shipped with this document

CPC Model:

Software Version:

Feature Categories

Description

System Features

System Features are either available on a system-

wide basis or aid in the overall administration of the

System.

User Maintenance

User Maintenance Features are used by the end user

to maintain the System. These items include setting

time and date, Personal Speed Dial (PSD) numbers

and names, System Speed Dial (SSD) numbers and

names, extension names, Verified ID codes, Call

Forward ID codes for Voice Mail, Message Key ID

codes, Mode schedule, Special Day mode, Excep-

tion Day mode, and Day of Week mode.

Key Telephone Features

Key Telephone Features are available to System Key

phones. System Key phones are proprietary digital

sets that provide feature access through a combina-

tion of feature keys and access codes.

Digital Single-Line Tele-

phone (DSLT) Features

DSLT Features are available to DSLTs. DSLTs pro-

vide digital audio quality and limited feature key

access in a single-line set.

Single Line Telephone

(SLT) Features

SLT Features are available on a standard analog

push button telephone set. Since SLTs are not

equipped with feature keys, most features are

accessed by using the dialpad and/or the switchhook.

*SBS/A-Series (UK)

Features

Beginning with Version 1.0, the ICX system can be

used with SBS/A-Series (UK only) telephones. See

Appendix A for a list of differences between S-ICX

key telephone features and those available on the

SBS/VB-9, A-Series telephones.

Summary of Contents for S-ics








































































































































































































































































































































Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands

Panasonic S-ics, Technical Manual

Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands