Section 700 - Operation
Chapter 5. Key Telephone Features
S-ICX-64-700
S-ICX (International) issued April 2002
137
To park a call at another extension:
To retrieve a transferred call park:
Hardware Requirements
•
N/A
Considerations
•
You cannot park more than one call at a time.
•
Call Park functions can be assigned to FF keys (see “Flexible Function Keys” on page 158).
•
No more than one Call Park Answer key may be assigned to a single telephone.
•
A Call Park Answer key may not be assigned to the EM/24 or DSS/72 console.
•
If a call is parked by Call Park key, the LED flashes.
•
LCD softkeys are also available for Call Park.
•
Once a call is parked, it cannot be accessed by the trunk key or direct trunk access (similar to
exclusive hold).
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
•
Depending on the Station/Floating Park Hold Pickup setting (FF1-0-02-0025), the call pickup
access code can set to
*9
(default), 773. The “
*9
” access code operates as follows:
Action
Result
1. Press the
HOLD
key.
• Current call on hold
•
CO HOLD #XX
displays (where XX =
exchange line number)
2. Enter the Call Park Transfer access code (default =
774
).
Enter TRNS EXT #
displays
3. Dial the extension number to receive the parked call,
4. OR
5. Press the BLF key
Park (ext#)
displays on lower display
6. If necessary, page the party that needs to retrieve the call.
Action
Result
1. At the extension with the transferred park call, lift the hand-
set or press the
ON/OFF
key.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default =
772
).
•
CO TALK TRK #XX
displays (where
XX = line number)
• Connected to parked call
System Size
Virtual Line Number and Operation
96
01-09: Floating Hold pick up
10-96: For Station Park Hold pick up purpose
