Section 700 - Operation
Chapter 5. Key Telephone Features
S-ICX-64-700
S-ICX (International) issued April 2002
143
To transfer a call to an outside number without supervising the transfer:
Camping a Call Onto a Busy Extension
Operation
To camp a call onto a busy extension:
Hardware Requirements
•
N/A
Considerations
•
If On-Hook Transfer is not enabled for the transferring party’s Extension Class of Service (COS),
he/she must press the
PROG
or
RELEASE
key before hanging up to complete the transfer.
•
If the call is not answered by the third party before the Transfer Recall Timer expires, the call
will recall to the transferring extension.
•
Beginning with Version 5.0, a Transfer Recall (only on non-appearing calls) may be answered on
another extension using the Call Pickup feature. However, an incoming Transfer Recall cannot
be picked up during conversation.
Action
Result
1. While on a call, press the
HOLD
key.
Intercom dial tone
2. Press a vacant trunk key or enter an exchange line access
code (default = 9).
3. Dial the number to which the call is to be transferred.
4. Complete the transfer:
• If On-Hook Transfer is enabled for your Extension COS,
complete the transfer by replacing the handset or pressing
the
ON/OFF
key.
• If On-Hook Transfer is disabled, press the
PROG
key (or
RELEASE
key is using DSS/72).
Action
Result
1. While on a call, press the
HOLD
key.
Intercom dial tone
2. Dial the extension number to which the call is to be trans-
ferred.
3. If your extension does not have Auto Camp-on activated,
enter the Camp-on (Call Waiting) code (default =
2
).
Camp-on tone heard at the called exten-
sion
4. Complete the transfer:
• If On-Hook Transfer is enabled for your Extension COS,
complete the transfer by replacing the handset or pressing
the
ON/OFF
key
• If On-Hook Transfer is disabled, press the
PROG
key (or
RELEASE
key is using DSS/72).
