174
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 5. Key Telephone Features
Section 700 - Operation
To answer a message waiting indication (callback):
To cancel a callback message:
Note:
Message waiting/callback messages may also be cancelled by either the originator or the
receiver by calling the other party.
Hardware Requirements
•
N/A
Considerations
•
The System has priority message waiting for 3rd-party Voice Mail. See “Voice Mail” on page 71.
3. While the phone is still ringing, or when you hear the busy
tone, enter the Message Wait Set code (default =
4
).
MSG Accepted
displays
4. Replace the handset or press the
ON/OFF
key.
•
Message
lamp flashes at called exten-
sion
•
MSG EXT XXX
displays (where XXX
= calling extension number) or name
of calling extension displays at called
extension
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Enter the Message Wait Callback code (default =
*6
) or
press the
MSG FF
key if using a large-display phone.
OR...
Press the Flexible Function (FF) Key assigned as a Message
Callback Key (Version 4.5 and higher).
• Telephone automatically dials exten-
sion that sent the message waiting indi-
cation
•
Message
lamp goes off when your call
is answered
Action
Result
1. Lift the handset or press the
ON/OFF
key.
Intercom dial tone
2. Enter the Callback Request Cancel code (default =
*5
) or
press the
MSG FF
key if using a large-display phone.
MSG Cleared
displays
3. Replace the handset or press the
ON/OFF
key.
Message
lamp goes off
Action
Result
