228
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 6. DSLT Features
Section 700 - Operation
Hardware Requirements
•
N/A
Considerations
•
N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension by
dialling the Floating Hold orbit number for the held call.
Floating Hold is useful when the intended recipient of a call must be located via a page. The call can
be placed in a Floating Hold “orbit” and that orbit number announced during the page. The paged
party can then pick up the call by dialling the orbit number.
Operation
To place a call on Floating Hold:
To retrieve a call from Floating Hold:
Hardware Requirements
•
N/A
2. Enter the Specified Exchange Line Answer code (default =
*0
).
3. Enter the exchange line number.
Action
Result
1. Press the
HOLD
key.
Intercom dial tone
Action
Result
1. Enter the Floating Hold Answer feature access code
(default =
*9
).
2. Enter the Floating Hold orbit number
01-96
(CPC-HS/HM)
or
01-09
(CPC-HS/HM) (See considerations below.)
Action
Result
