Panasonic S-ics Technical Manual Download

Page: 265 / 327

Section 700 - Operation

Chapter 7. SLT Features

S-ICX-64-700

S-ICX (International) issued April 2002

265

Absence Message

Description

Extension users can leave text messages related to their phones when they are away. When the

unattended extension is dialed, the text message displays on the caller’s phone. Any one of the

following messages can be selected. Messages 5 to 9 have no default message text. All the messages

can be changed through system programming.

Table 23. Absence Messages

Optionally, a return time can be input. Example Return Times for Absence Messages include:

Operation

To set an Absence Message

Message No.

Message Text Displayed on

Called Party’s Key

Telephone

Message No.

Message Text Displayed on

Called Party’s Key

Telephone

In Meeting

Absence_No_5

At Lunch

Absence_No_6

Out of Office

Absence_No_7

Vacation

Absence_No_8

Another Office

Absence_No_9

Input

Display

No input

Return

Return 9:00

Return 11:00

615

Return 6:15

1035

Return 10:35

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the Absence Message code (default

= 729

3. Enter the Absence Message number. (See Table 23 above.)

4. If desired, enter the 4-digit returning time.

5. Flash the hookswitch.

6. Replace the handset.

Summary of Contents for S-ics








































































































































































































































































































































Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands

Panasonic S-ics, Technical Manual

Search results

Summary of Contents for S-ics

Reviews:

Related manuals for S-ics

Brands by name

Popular brands