278
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 7. SLT Features
Section 700 - Operation
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transferred call park:
Hardware Requirements
•
N/A
•
Considerations
•
You cannot park more than one call at a time.
•
If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
Action
Result
1. Lift the handset
Intercom dial tone
Enter the Call Park Answer/Other Ext. access code (default
=
773
).
OR...
Enter the Call Park/Floating Hold Answer feature access
code (default =
*9
).
2. Dial the number of the extension that parked the call.
• Connected to parked call
Action
Result
1. While on a call, press the hookswitch.
• Intercom dial tone
2. Enter the Call Park Transfer access code (default =
774
).
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
Action
Result
1. At the extension with the transferred park call, lift the hand-
set.
Intercom dial tone
2. Enter Call Park Answer/Self access code (default =
772
).
• Connected to parked call
