294
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 7. SLT Features
Section 700 - Operation
Operation
To set up the monitored extension:
When a monitored extension receives a call, the caller hears a busy tone. Additional operations may
be performed from the monitored extension when it is in monitored mode:
It is not possible to monitor an extension from an SLT telephone.
Hardware Requirements
•
N/A
Considerations
•
Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.
•
If the monitored extension is placed on-hook while Room Monitoring is activated, the
monitoring extension will hear a fast busy tone.
•
If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored
extension will remain in the monitored mode, and can be accessed by any other extension
allowed to access the room monitoring mode.
•
A room cannot be monitored from more than one extension at a time. If an attempt is made to
monitor an extension while the extension is being monitored, the user will hear a fast busy tone.
•
ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or
monitored modes.
•
A monitoring extension cannot forward a call on hold to a monitored extension.
•
A monitored extension cannot receive a transferred call.
Speed Dialling
Description
The System supports the following speed dial features:
•
Personal Speed Dial (PSD)
Action
Result
1. Dial the monitored extension access code (
default 775
)
Note:
The handset must be off-hook to activate the
Room Monitor feature.
You will hear a confirmation tone after
the monitored extension has enabled the
Room Monitor feature.
Action
Result
1. Placing the handset back on-hook
Monitored mode is cancelled. Extension
returns to idle.
2. Pressing digits 0-9, *, #
No response is given. Extension remains
in monitored mode.
3. FL/R
Monitored mode is cancelled. Dial tone is
returned to handset.
