56
S-ICX (International) issued April 2002
S-ICX-64-700
Chapter 3. System Features
Section 700 - Operation
Network Centralized Voice Mail
Network Centralized Voice Mail allows one primary attendant group in the network to handle
network attendant calls.
Network Extension Calling
Network Extension Calling allows you to reach an extension on another PBX. Based on the number
you dial, the System network routes the call automatically.
Network Flash Transfer
When three or more systems are networked together with an S-ICX as the tandem, Network Flash
Transfer determines where a call is held when Network Hold is pressed.
Network Hold
Network Hold allows the user to place a call on hold by pressing a programmed line key or MCO key.
When using Network Hold, you cannot establish a conference call between nodes, and only one party
can place the call on hold.
Network Paging
Network Paging allows users on one System to page on another System when the appropriate Class of
Service (COS) allows.
Network Transfer Recall
Network Transfer Recall allows a call which has been transferred to another node to recall back to the
transferring extension.
Tandem Connection
Tandem Connection allows calls that are received over the network tie lines to be automatically
routed on to another PBX or out to the public network.
Hardware Requirements
•
T1 (USA), E&M (HK) or AC-15 (UK) Card
Considerations
•
N/A
Non-Blocking Architecture
Description
The System is totally non-blocking. All extension and outside lines are available for use at the same
time.
Hardware Requirements
•
The CPC-HS supports 64 ports (max. 28 extensions and 24 digital extension ports). The CPC-
HM supports up to 116 ports (max. 60 extensions and 24 digital extension ports).
