Error Code Diagnosis Contents Description of error
Automatic FL Display
Remarks
ITOP
UD assembly
UD Rack does not move to
front direction. This lead to
UD base not raise to top
position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
IUDS
UD assembly
After TOP SW is detected,
UD rack does not move into
tray 1 position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
HOME
Cam gear/gear
assembly abnormal
Cam gear does not move to
“HOME”
position
under
following conditions
1.
After tray is load to
“PLAY” position.
2.
After tray is unload to
“STOCK” position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
LOAD
Tray drive assembly
abnormal
Tray unit does not move
from “STOCK” to “PLAY”
position
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
PDRV
Cam gear/gear
assembly abnormal
Cam gear does not move
from “HOME” to “PLAY”
drive position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
UDU
UD base asssembly
abnormal
UD Base assembly does
not move upwards from tray
5 to tray 2
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
UDD
UD base asssembly
abnormal
UD Base assembly does
not move downwards from
tray 1 to tray 5.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
UD1
UD base asssembly
abnormal
UD Base assembly does
not move to tray 1.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
F1NG
Fail - safe mode. (For
open/close tray
unit(s))
When
the
tray
open
operation is performed, it
fails
to
open.
It
will
automatically close all trays
after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
19
SA-AK340EE
