The error code is automatically display after entering into self-diagnostic mode.
Error Code Diagnosis Contents Description of error
Automatic FL Display
Remarks
H01
Mode SW, plunger
and capstan motor
abnormal
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
H02
Rec INH SW
abnormal
For deck mechanism unit (For deck 2).
Press [
] on main unit for
next error.
H03
HALF SW abnormal
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
F01
F02
Reel pulse abnormal
TPS error
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
F15
RESET SW
abnormal
REST SW: ON is not
detected
within
the
specified time.
For CD unit (For Traverse).
Press [
] on main unit for
next error.
F26
Transmission error
between CD Servo
LSI IC and
microprocessor IC
When set to CD mode, the
sense signal does not turn
“Low”, a fail safe time after
system
command
transmission is sent.
For CD unit (For Traverse).
Press [
] on main unit for
next error.
F61
Power Amp IC output
abnormal
Upon
power
on,
PCONT=HIGH, DCDET=L
after checking LSI.
For power.
Press [
] on main unit for
next error.
IHMS
Cam gear
abnormality
Cam gear does not rotate
to “HOME” position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ICSL
Cam gear/gear units
abnormal
Cam gear does not rotate
to “PLAY” driving position
and hence does not drive
playing tray to “STOCK”
position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
ISTK
Drive rack/gear
assembly abnormal
The tray drive rack does not
move to “STOCK” position.
(Tray does not move to
“STOCK” position)
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
IPLY
Drive rack/gear
assembly abnormal
The tray drive rack does not
move to “PLAY” position.
(Tray does not move to
“PLAY” position)
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
18
SA-AK340P / SA-AK340PC
Summary of Contents for SA-AK340P
