Error Code
Diagnosis Contents Description of error
Automatic FL Display
Remarks
HOME
Cam gear/gear
assembly abnormal
Cam gear does not move to
“HOME”
position
under
following conditions
1.
After tray is load to
“PLAY” position.
2.
After tray is unload to
“STOCK” position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
LOAD
Tray drive assembly
abnormal
Tray unit does not move
from “STOCK” to “PLAY”
position
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
UNLD
Tray drive assembly
abnormal
Tray unit does not move
from “PLAY” to “STOCK”
position
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
PDRV
Cam gear/gear
assembly abnormal
Cam gear does not move
from “HOME” to “PLAY”
drive position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
UDU
UD base asssembly
abnormal
UD Base assembly does
not move upwards from tray
5 to tray 2
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
UDD
UD base asssembly
abnormal
UD Base assembly does
not move downwards from
tray 1 to tray 5.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
F1NG
Fail - safe mode. (For
open/close tray
unit(s))
When
the
tray
open
operation is performed, it
fails
to
open.
It
will
automatically close all trays
after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
F2NG
Fail - safe mode. (For
open/close tray
unit(s))
When
the
tray
close
operation is performed, it
fails
to
close.
It
will
automatically open all trays
after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
SRVC_TRV
To unlock the
traverse unit for
service
1.
All trays set to “STOCK”
position
2.
Mechanism set to tray 5
3.
Cam
gear
set
to
“HOME” position
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
RSET
Cam gear jam/close
sensor faulty
During tray re-open, the
cam gear will rotate in the
opposite direction to reset
the
cam
gearposition.
When it fails, the error code
will appear.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main
unit for next error.
9.4.3. Error Code Table For Power Supply
Error Code Diagnosis Contents Description of error
Automatic FL Display
Remarks
F61
Power Amp IC output
abnormal
Upon
power
on,
PCONT=HIGH, DCDET=L
after checking LSI.
For power.
Press [
] on main unit for
next error.
9.4.4. CRS1 Error Code display
CRS1 Error Code display
1. The errors that occured in CRS1 Mechanism can be recalled and displayed, in the order of the occurence under self-diagnostic
for procedures to enter this mode.
22
SA-AK450PL
Summary of Contents for SA-AK450PL
