11 Description of Error Code
11.1. Error Detection for Cassette Mechanism block
No.
Error
Error Display
Problem Condition
1
MODE SW detection error
H01
Faulty operation of cassette mechanism.
Faulty contact or short-circuit of mechanism mode switch (S951, S971)
2
REC INH SW detection error
H02
Recording not possible.
Faulty contact or short-circuit of REC INH switch (S974, S975)
3
HALF SW detection error
H03
Playback can not perform.
Faulty contact or short-circuit of HALF switch (S952, S972)
4
Reel Pulse detection error
F01
The tape advances slightly and then stops.
Faulty reel pulse, faulty hole detect IC (IC951, IC971)
5
TPS abnormal
F02
Cassette deck will not perform TPS function.
Faulty playback EQ/recording amplifier IC (IC1101)
11.2. Error Detection for CD/Changer block
No.
Error
Error Display
Problem Condition
1
REST SW detection error
F15
CD dose not function.
This error occurs when the Optical Pick Up REST SW (S701) is not detected
within the specified time (about 8 seconds)
2
CD tray opens automatically
F16
CLAMP switch (S4) NG (Check & Replace)
3
Does not startup when
“TUNE/TIME ADJ^” button is
pressed
F17
BOTTOM switch (S5) NG (Check & Replace)
4
Transmission error between CD
servo LSI and micon
F26
CD does not function.
This error occurs when the POWER is ON for the CD block and an error is
detected after the transmission has started.
5
Startup fails even when you insert
CD or the selected disc tray does
not open
F27
Tray 1 detect switch or Tray 2 detect switch NG (Check & Replace)
6
Cannot insert CD
F28
Tray 1 detect switch NG (Check & Replace)
7
Cannot eject CD
F29
Check if Disc is stuck. Tray 2 detect switch NG (Confirm & Replace)
8
CD Tray closes
H15
CD disc tray detect switch NG (S3) (Check & Replace)
11.3. Error Detection for Cassette Mechanism block
No.
Error
Error Display
Problem Condition
1
POWER AMP output abnormal
F61
When POWER is switch on, power become off automatically.
During normal operation, if DC DET become L, PCNT shall become L and the
error display on the left shall be displayed (IC500)
33
SA-AK48
Summary of Contents for SA-AK48
