59
9.18. Replacement of Audio Digital
Amp IC (IC5300)
• Follow (Step 1) to (Step 5) of Item 9.3
• Follow (Step 1) to (Step 6) of Item 9.4
• Follow (Step 1) to (Step 9) of Item 9.14
9.18.1. Disassembly of Audio Digital Amp
IC (IC5300)
Step 1 :
Desolder pins of Audio Digital Amp IC (IC5300) on
reverse side of D-Amp P.C.B..
Step 2 :
Remove 1 screw.
Step 3 :
Remove TR Spring in the direction of arrow shown.
Step 4 :
Remove Audio Digital Amp IC (IC5300) from the Heat-
sink Unit A.
Caution : During replacement of the part, avoid touching
the Heatsink, it may lead to injuries.
9.18.2. Assembly of Audio Digital Amp IC
(IC5300)
Step 1 :
Mount the Audio Digital Amp IC (IC5300) on to the D-
Amp P.C.B..
Step 2 :
Screw back TR Spring to hold the Audio Digital Amp IC
(IC5300) onto the Heatsink Unit A.
Step 3 :
Solder the pins of Audio Digital Amp IC (IC5300).
Step 4 :
Use a blower to remove the minute particles after the
screwing of TR Spring.
Caution : Ensure pins of the Audio Digital Amp IC (IC5300)
are properly seated and soldered on D-Amp P.C.B..
Summary of Contents for SA-AK980PU
