26
8.10. Disassembly of Main P.C.B.
•
Refer to “Disassembly of Top Cabinet”.
•
Refer to “Disassembly of Rear Panel”.
Step 1
Lift up Wire Clampers.
Step 2
Remove 2 screws.
Step 3
Remove Transformer Bracket Unit.
Step 4
Detach 9P Wire at connector (CON2) on SMPS Module.
Step 5
Detach 17P FFC at connector (CN2500) on Main
P.C.B..
Step 6
Detach 9P Wire at connector (CN2503) on Main P.C.B..
Step 7
Detach 4P Wire at connector (CN2507) on Main P.C.B..
(For AKX400)
Step 8
Detach 10P FFC at connector (P2004) on Main P.C.B..
Step 9
Detach 24P FFC at connector (P2005) on Main P.C.B..
Step 10
Remove Main P.C.B..