46
9.16. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of Top Cabinet.”.
• Refer to “Disassembly of Front Panel Assembly”.
• Refer to “Disassembly of D-Amp P.C.B.”.
• Refer to “Disassembly of Surround D-Amp P.C.B.”.
Step 1 Remove 1 screw.
Step 2 Remove 2 screws.
Step 3 Detach 2P wire at the connector (CN2009) on Main
P.C.B..
Step 4 Remove Inner Fan Unit.
Step 5 Remove 2 screws.
Step 6 Detach 11P Cable Wire at the connector (CN5802) on
SMPS P.C.B..
Step 7 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Caution: Insulated Material is required in order to insulated
SMPS P.C.B. from other parts.
Step 8 Desolder 2 Wire pins, Black TL7 (Black), TL8 (Red)
wires pin.
Step 9 Remove SMPS P.C.B. as arrow shown.
Summary of Contents for SA-AKX90PH
