56
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A on the solder side of
SMPS P.C.B..
Caution: Ensure pins of the Rectifier Diode (D5702) are
properly seated and soldered on SMPS P.C.B..
9.22. Replacement of Rectifier Diode
(D5801)
• Refer to “Disassembly of SMPS P.C.B.”.
9.22.1.
Disassembly of Rectifier Diode
(D5801)
Step 1 Desolder pins of the Rectifier Diode (D5801) on the sol-
der side of SMPS P.C.B.
Step 2 Remove 1 screw at Rectifier Diode (D5801).
Step 3 Remove the Rectifier Diode (D5801) from the SMPS
P.C.B..
Caution: Avoid touching the Heatsink B due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Summary of Contents for SA-AKX92PH
