59
9.24.2.
Assembly of Rectifier Diode
(D5803)
Step 1 Apply grease to the Heatsink B.
Step 2 Fix Rectifier Diode (D5803) on SMPS P.C.B.
Caution: Ensure pins of the Rectifier Diode (D5803) are
properly inserted on SMPS P.C.B.
Step 3 Screw the Rectifier diode (D5803) to the Heatsink B.
Caution: Ensure the Rectifier Diode (D5803) is tightly
screwed to the Heatsink B.
Step 4 Solder pins of the Rectifier Diode (D5803) on the solder
side of SMPS P.C.B.
9.25. Disassembly of CD Mecha-
nism Unit (BRS1C)
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of D-Amp P.C.B.”.
Step 1 Detach 15P Wire at the connector (CN5802) on SMPS
P.C.B..
Step 2 Detach 12P FFC at the connector (CN2011) on Main
P.C.B.
Step 3 Detach 2P Wire at the connector (CN2005) on Main
Unit..
Step 4 Remove 2 screws.
Summary of Contents for SA-AKX92PH
