24
25
10.2. After Servicing
About Circuit
Start
Remove the Power
Cable and reInsert it
after 10 sec check the
Symptom?
No Symptom
NG
After Service
Refer to Other Symptom
(See next pages)
END
Updating
Firmware
(*a)and
deleting e
rror code
(*b)
(*b)
1.Power on.
2. Press [5][9] and [red] on remote control
simultaneously for more than 5 sec.
3.[70RET] appears on LED display.
4.Press [ ] on remote control .
5.
[80RET] appears on LED display.
6.Press [OK] on remote control
7 Wait for about 30 sec
(*a)
Refer to P7 3.3
How to Update Firmware
5.
[80RET] appears on LED display.
6.Press [OK] on remote control
7.Wait for about 30 sec.
8.[SERV]] appears on LED display.
9.Press [9][9] on remote control .
10.Error code be delelted .
11.Press and hold [Power] on (remote control
or unit) and exit the service mode.
14
VQT5F60
If your wireless network is encrypted;
Enter your encryption key (password).
≥
You can switch between capital and lower case
letters by pressing the “Shift” key.
≥
Refer to the owner’s manuals of the hub or router.
≥
Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥
If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥
Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
is in process.
After the firmware is installed, “FIn” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
≥
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
>
32,
“Firmware Version Information”)
≥
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (
>
32)
l
#
*
@
.
Symbols
Encryption Key (Password)
Shift
Delete
Finish
Alphanumeric
Other Characters
OK
RETURN
'PVGTECUGUGPUKVKXG
“
;
,
-
_
~
:
/
Space
`
3
6
9
2
5
8
0
1
4
7
Firmware updates
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
No
OK
RETURN
The firmware was updated.
Current Version
:
x.xx
RETURN
SC-BTT466&465&405P-VQT5F60_mst.book 14 ページ ２０１４年１月１５日 水曜日 午後５時３６分
Start
Remove the Power
Cable and reInsert it
after 10 sec check the
Symptom?
No Symptom
NG
After Service
Refer to Other Symptom
(See next pages)
END
Updating
Firmware
(*a)and
deleting e
rror code
(*b)
(*b)
1.Power on.
2. Press [5][9] and [red] on remote control
simultaneously for more than 5 sec.
3.[70RET] appears on LED display.
4.Press [ ] on remote control .
5.
[80RET] appears on LED display.
6.Press [OK] on remote control
7 Wait for about 30 sec
(*a)
Refer to P7 3.3
How to Update Firmware
5.
[80RET] appears on LED display.
6.Press [OK] on remote control
7.Wait for about 30 sec.
8.[SERV]] appears on LED display.
9.Press [9][9] on remote control .
10.Error code be delelted .
11.Press and hold [Power] on (remote control
or unit) and exit the service mode.
14
VQT5F60
If your wireless network is encrypted;
Enter your encryption key (password).
≥
You can switch between capital and lower case
letters by pressing the “Shift” key.
≥
Refer to the owner’s manuals of the hub or router.
≥
Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥
If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥
Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
is in process.
After the firmware is installed, “FIn” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
≥
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
>
32,
“Firmware Version Information”)
≥
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (
>
32)
l
#
*
@
.
Symbols
Encryption Key (Password)
Shift
Delete
Finish
Alphanumeric
Other Characters
OK
RETURN
'PVGTECUGUGPUKVKXG
“
;
,
-
_
~
:
/
Space
`
3
6
9
2
5
8
0
1
4
7
Firmware updates
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
No
OK
RETURN
The firmware was updated.
Current Version
:
x.xx
RETURN
SC-BTT466&465&405P-VQT5F60_mst.book 14 ページ ２０１４年１月１５日 水曜日 午後５時３６分
(*a)
