40
RQT7388
Changing settings
1
While VHS MENU is displayed (
➜
page 38)
Press [
3 4
] to select the “OPTION”
and press [ENTER].
2
Press [
3 4
] to select the item and
press [
2 1
] to change the setting
(
➜
below).
To exit the settings screen
Press [MENU] until the screen disappears.
Panasonic video cassette recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place another Panasonic video cassette
recorder close together.
≥
Use “1”, the factory preset, under normal circumstances.
1
While OPTION menu is displayed
Press [
3 4
] to select the “REMOTE
CONTROL” and press [ENTER].
2
Press [
2 1
] to select the code (1 or 2)
and press [ENTER].
The remote control code on the unit has been set.
3
While pressing [ENTER] on the remote
control, press and hold the numbered
button ([1] or [2]) corresponding to the
code you selected in step 2.
The remote control code on the remote control has been set.
The following is displayed when you use a remote control with the
different code.
The unit’s remote control code
Change its code to match the unit’s
(
➜
step
3).
OPTION
OPTION 1/2
OSD ON
OFF
TAPE SELECT
T120
T160
T180
BLUE BACK
ON
OFF
JET NAVIGATOR
ON
OFF
DELETE NAVIDATA
NO
YES
JET SEARCH
x27
x35
SELECT :
s
/
r
:
END :MENU
2 1
≥
≥
≥
≥
≥
≥
OPTION 2/2
MTS MAIN
SAP
MONO
REMOCON CODE
1
2
DISPLAY
BRIGHT
DIM
OFF
SELECT :
s
/
r
:
END :MENU
2 1
≥
≥
3
4
3
4
≥
REMOTE CONTROL
Items
Settings
(Underlined items are the factory preset.)
OSD (
➜
page 41, On-screen display)
ON:
Messages appear on the television for about five seconds
after you perform operations.
OFF:
Messages do not appear.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
T120:
T30, T60, T90, T120 tapes
T160:
T140, T160 tapes
T180:
T180 tapes
BLUE BACK
ON:
The screen shows a blue background when you play
unrecorded portions.
OFF
JET NAVIGATOR (
➜
page 36)
ON:
Jet Navigator data automatically registered.
OFF:
Data not registered.
DELETE NAVIDATA
Delete all the Navigation data registered in the unit.
See page 36 to delete data on a single tape.
NO
YES:
Then press [ENTER] when you want to delete all the Jet
navigator data.
JET SEARCH (
➜
page 30)
Set the speed for JET SEARCH when playing EP and VP tapes.
a
27
a
35
Select
a
27 if the picture is poor at
a
35.
MTS (
➜
page 41, Changing audio)
Set the MTS (Multi-channel Television Sound Stereo) reception
type.
MAIN: To receive stereo broadcasts.
SAP:
To receive SAP when being broadcast.
MONO: To receive monaural broadcasts (e.g., when reception is
poor).
REMOTE CONTROL
1
2
DISPLAY
Set the brightness of the unit's display when the unit is in standby
mode.
BRIGHT: The display is bright all the time.
DIM:
The display dims when the unit is in standby mode.
OFF:
The display turns off when the unit is in standby mode.
VHS
7388en.book 40 ページ ２００３年１２月２２日 月曜日 午後９時３９分
