(1) DVD-RAM (DVD-VR compatible, JPEG formatted discs)
(2) DVD-Audio
(3) DVD-Video
(4) DVD-R, DVD-RW (DVD-Video compatible)
+R, +RW (Video compatible)
(5) CD-Audio (CD-DA)
(6) Video CD
(7) SVCD (Conforming to IEC62107)
(8) CD-R/CD-RW (CD-DA, Video-CD, SVCD, MP3, WMA, JPEG
formatted discs)
(9) MP3/WMA
l
Compatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 320 kbps
l
Maximum number of recognizable audio and picture contents
and groups:
4000 audio and picture contents and 400 groups
(10) JPEG
l
Exif Ver 2.1 JPEG Baseline files
l
Picture resolution: between 320 x 240 and 6144 x 4096
pixels (sub sampling is 4:2:2 or 4:2:0)
l
Maximum number of recognizable audio and picture contents
and groups:
4000 audio and picture contents and 400 groups
(11) HighMAT Level 2 (Audio and lmage)
Pick up:
Source of light beam:
Semiconductor Laser
Wavelength:
l
CD:
785nm
l
DVD:
662nm
Laser power:
P area:
CLASS IIa/ CLASS I
PC/ PX areas:
CLASS 2/ CLASS 3a
Audio output (DISC):
Number of channels:
5.1 ch (FL, FR, C, SL, SR,
SW)
Audio performance:
Frequency response:
DVD (linear audio):
4 Hz-22 kHz (48 kHz sampling)
4 Hz-44 kHz (96 kHz sampling)
DVD-Audio:
4 Hz-88 kHz (192 kHz
sampling)
CD-Audio:
4 Hz-20 kHz
S/N ratio:
CD-Audio:
95 dB
Dynamic range:
DVD (linear audio):
95 dB
CD-Audio:
93 dB
Total harmonic distortion:
CD-Audio:
0.005 %
l
Video section
Video system:
Signal system:
NTSC
Composite video output:
Output level:
1 Vp-p (75
Ω
)
Terminal:
Pin jack (1 system)
S-video output:
Y output level:
1 Vp-p (75
Ω
)
C output level:
NTSC; 0.286 Vp-p (75
Ω
)
Terminal
S terminal (1 system)
Component video output (480P/480I):
Y output level:
1 Vp-p (75
Ω
)
P
B
output level:
0.7 Vp-p (75
Ω
)
P
R
output level:
0.7 Vp-p (75
Ω
)
Terminal:
Pin jack (Y: green, P
B
: blue,
P
R
: red) (1 system)
Power consumption in standby mode:
P/PC areas:
approx 0.5W
PX area:
approx 0.9W
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Solder:
This model uses lead free solder (PbF).
2
SA-HT930P / SA-HT930PC / SA-HT930PX
Summary of Contents for SA-HT930P
