34
Step 5 Release P.C.B. Spacers.
Step 6 Remove SMPS Module.
8.17. Disassembly of Main P.C.B.
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 4 screws.
Step 2 Detach 9P Wire at the connector (CN2507) on Main
P.C.B..
Step 3 Detach 6P Wire at the connector (CN2508) on Main
P.C.B..
Step 4 Detach 30P FFC at the connector (CN2506) on Main
P.C.B..
Step 5 Detach 16P FFC at the connector (CN2505) on Main
P.C.B..
Step 6 Detach 7P Wire at the connector (CN2509) on Main
P.C.B..
Step 7 Detach 2P Wire at the connector (CN2105) on Main
P.C.B..
Step 8 Detach 2P Wire at the connector (CN2104) on Main
P.C.B..
Step 9 Detach 10P FFC at the connector (P5101) on Main
P.C.B..
Step 10 Detach 24P FFC at the connector (P5001) on Main
P.C.B..
Step 11 Detach 13P Cable at the connector (CON2) on SMPS
Module.
Summary of Contents for SA-MAX4000
