36
9 Service Position
Note: For description of the disassembly procedures, refer
Section 8 of the Service Manual.
9.1.
Checking of FL Display P.C.B.,
Button Left P.C.B., Button
Right P.C.B., Multi Control
P.C.B. and BT&NFC P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove FL Display P.C.B..
Step 4 Remove Illumination Button P.C.B..
Step 5 Remove BT&NFC P.C.B..
Step 6 Remove DJ Cabinet Unit.
Step 7 Attach 30P FFC at the connector (CN2506) on Main
P.C.B..
Step 8 Attach 16P FFC at the connector (CN2505) on Main
P.C.B..
Step 9 Place FL Display P.C.B. on the insulated material.
Step 10 Attach 13P FFC at connector (P1700) on FL Display
P.C.B..
Step 11 Attach 12P FFC at connector (P7701) on BT&NFC
P.C.B..
Step 12 FL Display P.C.B., Button Left P.C.B., Button Right
P.C.B., Multi Control P.C.B. and BT&NFC P.C.B. can be
checked as diagram shown.
Summary of Contents for SA-MAX4000
