Step 2 Lift up to remove the Bluetooth Holder from the Front
Panel Unit.
Step 3 Release catch.
Caution: During assembling, ensure that the Bluetooth
P.C.B. is properly guided and fully catched onto the Blue-
tooth Holder.
Step 4 Remove the Bluetooth P.C.B..
9.8.
Disassembly of Illumination
Button P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 2 screws.
Step 2 Detach 2P Cable at the connector (CN6800) on Illumi-
nation Button P.C.B..
Step 3 Lift up to remove the Illumination Button P.C.B..
9.9.
Disassembly of Control P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of FL Display P.C.B.”.
Step 1 Remove the Control Knob.
Summary of Contents for SA-MAX750LMK
