9.15. Disassembly of Mic P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove the Mic Knob.
Step 2 Detach 8P Cable at the connector (CN6103) on Mic
P.C.B..
Step 3 Remove 2 screws.
Step 4 Remove the Mic P.C.B..
Caution: During assembling, ensure that the Mic P.C.B. is
properly inserted & fully seated onto the Front Panel Unit.
9.16. Disassembly of LED P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 2 screws.
Step 2 Detach 4P Cable at the connector (CN5700) on LED
P.C.B..
Step 3 Release catches.
Step 4 Remove the LED P.C.B..
Caution: During assembling, ensure that the LED P.C.B. is
properly inserted and fully catched onto the Lighting
House.
Summary of Contents for SA-MAX750LMK
