11
6 Service Mode
This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability.
6.1.
Service Mode Table
Service Mode
To enter into Service Mode
checking
Item
FL display
Key operation
Mode name
Description
Error code information
Delete Error code
Example:
System will perform a check on
any unusual/error code from the
memory
To clear the stored in memory
(EEPROM IC)
i) Opecon version
Software Version
iii) AllPlay version
Cold Start
a) To display model name &
Opecon version
c) To display AllPlay version
ii) SDK version
b) To display SDK version
Step 1 : Select CD mode
(Ensure no disc is inserted).
Step 2 : Press and hold [ ] follow by
[ ] on main unit for 2
second
.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Step 1 : Press [STOP] on main unit.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Step 1 :
Press and hold [OK] on
remote control for more than
5
second.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Version display
(Display 1)
Press [DISPLAY] button on the
remote control.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Press [SETUP] button on the remote
control.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
To activate cold start upon next
power up.
(Backup data are initialized)
(Display 2)
(Display 3)
Model Name
PMX70
PMX100
PMX70B
PMX100B
Summary of Contents for SA-PMX100EG
