42
8.16.3.
Disassembly of CD Interface P.C.B.
• Refer to “Disassembly of CD Mechanism Unit”
• Refer to “Disassembly of Traverse Unit”
Note : The circuit is to be short to prevent electrostatic dis-
charge during replacement of CD Interface P.C.B..
Step 1 :
Solder point.
Caution : Avoid touching the surface of the Optical Pickup
Unit on the Traverse Unit.
Step 2 :
Remove 2 screws.
Step 3 :
Attach short pin to Traverse Unit.
Step 4 :
Desolder points on solder side of CD Interface P.C.B..
Step 5 :
Remove CD Interface P.C.B..
