33
8.9.
Disassembly of ALLPLAY
Antenna P.C.B.
• Refer to “Disassembly of Top Cabinet”
• Refer to “Disassembly of Front Panel Unit”
• Refer to “Disassembly of Panel Block”
Step 1 :
Release catch.
Step 2 :
Remove ALLPLAY Antenna P.C.B..
Caution : During assembling, ensure ALLPLAY Antenna
P.C.B. are inserted and seated into grooves.
8.10. Disassembly of SMPS P.C.B.
• Refer to “Disassembly of Top Cabinet”
Step 1 :
Remove screw.
Step 2 :
Detach 15P Wire at connector (CN1100) on Main
P.C.B..
Step 3 :
Remove 4 screws and detach ground wire.
Step 4 :
Lift up to remove SMPS P.C.B..