55
Step 1 Remove 1 screw at the rear panel.
Step 2 Remove 2 screws from the AC Inlet shield plate unit.
Step 3 Remove the AC Inlet shield plate unit.
Caution: Keep the AC Inlet shield plate unit in safe place.
Avoid denting it. Place it back during assembling.
Step 4 Remove the D-Amp P.C.B. bracket.
Caution: Keep the P.C.B. bracket in safe place. Avoid dent-
ing it. Place it back during assembling.
Step 5 Use plier to release the P.C.B. Spacer.
Step 6 Desolder black and red wire.
Step 7 Remove AC Inlet P.C.B.
Caution: During assembling of AC Inlet P.C.B., ensure the
P.C.B. is seated properly at the locators.
9.12. Disassembly of Main P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
Summary of Contents for SA-PT470EB
Page 13: ...13 ...
Page 43: ...43 Fig 3 Fan Connector CN5501 ...
Page 49: ...49 9 2 Main Components and P C B Locations ...
Page 109: ...109 ...