56
Step 1 Remove 2 screws at the rear panel.
Step 2 Remove 2 screws on Main P.C.B.
Step 3 Remove 2 earth springs on Main P.C.B.
Caution: Keep the earth springs in safe place. Avoid dent-
ing it. Place it back during assembling.
Step 4 Detach 14P FFC at the connector (CN6003) on the
Main P.C.B.
Step 5 Detach 7P cable at the connector (CN2010) on the Main
P.C.B.
Step 6 Detach 19P FFC at the connector (CN2007) on the
Main P.C.B.
Step 7 Slightly detach Main P.C.B. from rear panel in the direc-
tion of arrow.
Caution: When detaching Main P.C.B. from rear panel, be
careful of 2 catches at the rear panel.
Step 8 Slightly move the Main P.C.B up as diagram shown.
Step 9 Detach 24P cable at the connector (CN2801) on the
Main P.C.B.
Step 10 Detach 16P FFC at the connector (CN2003) on the
Main P.C.B.
Step 11 Detach 14P cable at the connector (CN2016) on the
SMPS P.C.B.
Step 12 Detach 8P cable at the connector (CN2017) on the
SMPS P.C.B.
Step 13 Detach 3P cable at the connector (CN4002) on the
Scart P.C.B.
Step 14 Lift up the Main P.C.B as diagram shown.
Step 15 Detach 50P FFC at the connector (CN2001) on the
Main P.C.B.
Step 16 Detach 17P FFC at the connector (CN2009) on the
Main P.C.B.
Step 17 Remove Main P.C.B.
Summary of Contents for SA-PT470EB
Page 13: ...13 ...
Page 43: ...43 Fig 3 Fan Connector CN5501 ...
Page 49: ...49 9 2 Main Components and P C B Locations ...
Page 109: ...109 ...
