57
Caution: During assembling, ensure the P.C.B. is seated
properly at the locators.
9.13. Disassembly of Co-processor
P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 13) of Item 9.12.
Step 1 Remove the Co-processor P.C.B as arrow shown.
9.14. Disassembly of D-Amp P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 2) to (Step 4) of Item 9.11.
• Follow (Step 1) to (Step 6) of Item 9.12.
Step 1 Move aside Main P.C.B. and position it according to the
diagram shown.
Step 2 Remove 2 screws on D-Amp P.C.B.
Step 3 Detach 17P FFC at the connector (CN5050) on D-Amp
P.C.B.
Step 4 Detach 8P cable at the connector (CN5500) on D-Amp
P.C.B.
Step 5 Twist the wire clamper to detach 3P cable at the con-
nector (CN5501) on D-Amp P.C.B.
Step 6 Remove 2 screws at the rear panel.
Step 7 Release the tab of the rear panel in the direction of
arrow.
Step 8 Remove D-Amp P.C.B.
Summary of Contents for SA-PT470EB
Page 13: ...13 ...
Page 43: ...43 Fig 3 Fan Connector CN5501 ...
Page 49: ...49 9 2 Main Components and P C B Locations ...
Page 109: ...109 ...