75
CN2009 to CN5050).
Step 17 Connect extension cable REEX1009 (50P cable from
FP8101 to CN2001).
Step 18 Remove the front panel assembly.
Step 19 Position Main P.C.B. according to the diagram shown.
Step 20 Turn the Front Panel and position it according to dia-
gram shown.
Step 21 Connect 14P cable at the connector (CN6003) on Main
P.C.B.
Step 22 Connect 7P cable at the connector (CN2010) on Main
P.C.B.
Step 23 Connect 19P cable at the connector (CN2007) on Main
P.C.B.
Step 24 Attach original cable with extension cable REXX0653-
J (14P cable from H2901 to CN2016).
Step 25 Attach original cable with extension cable REXX0724
(8P cable from H2900 to CN2017).
Step 26 Attach original cable with extension cable REXX0725
(8P cable from H5801 to CN5500).
Step 27 Remove 2 screws on AC Inlet Shield Plate Unit.
Step 28 Remove 2 screws on D-Amp P.C.B.
Step 29 Remove AC Inlet Shield Plate Unit.
Step 30 Remove the P.C.B. bracket.
Caution: Keep the P.C.B. bracket in safe place. Avoid dent-
ing it. Place it back during assembling.
Step 31 Twist the wire clamper to attach 3P cable at the con-
nector (CN5501) on D-Amp P.C.B.
Summary of Contents for SA-PT470EB
Page 13: ...13 ...
Page 43: ...43 Fig 3 Fan Connector CN5501 ...
Page 49: ...49 9 2 Main Components and P C B Locations ...
Page 109: ...109 ...