36
8.4.
Disassembly of Top Cabinet
Step 1 Remove 4 screws.
Step 2 Remove 5 screws.
Step 3 Release both sides of Top Cabinet outwards as arrow
shown.
Step 4 Slightly lift up to remove Top Cabinet.
8.5.
Disassembly of Front Panel
Unit
• Refer to “Disassembly of Top Cabinet”.
Step 1 Detach 30P FFC at the connector (CN2506) on Main
P.C.B. Ass’y.
Step 2 Detach 8P Cable at the connector (CN2511) on Main
P.C.B. Ass’y.
Step 3 Detach 5P Cable at the connector (CN2505) on Main
P.C.B. Ass’y.
Step 4 Detach 4P Cable at the connector (CN2510) on Main
P.C.B. Ass’y.
Step 5 Detach 5P Cable at the connector (CN2507) on Main
P.C.B. Ass’y.
Step 6 Remove 1 screw.
Step 7 Release tabs on both sides of Front Panel Unit.
Summary of Contents for SA-VKX95EE
