Before using
10
RQT6085
B
A
C
DEMO
Turning the demo function off
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby mode.
This function is set to on at the time of purchase.
During standby mode
Press and hold [
L
/–DEMO] until “NO
DEMO” is displayed.
The display changes each time the button is held down.
NO DEMO (off)
↔
DEMO ON (on)
To show a demonstration of the display
Press and hold [
L
/–DEMO] until “DEMO ON” is displayed.
Note
•
You cannot turn demo function off when the unit is on.
•
(SC-AK500) (SC-AK300)
DEMO function cannot be turned on in Full-Dim mode.
•
(SC-AK490) (SC-AK200)
DEMO function cannot be turned on when Dimmer is on.
Convenient functions
A
To mute the volume
Remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
“MUTING” goes out.
Muting can also be cancelled by lowering the volume all the
way (--dB).
When the system is turned off, the muting operation will be automatically
cancelled.
Remote control only
Use this for better television viewing.
Press [DIMMER].
Every time you press the button:
Semi-Dim: The backlights of the display are turned off.
Full-Dim: The display is dimmed and the backlights of the display
and the indicator, except for the AC supply indicator, are
turned off.
Press [DIMMER].
The display is dimmed and the indicator is turned off.
(The AC supply indicator remains on.)
Press [DIMMER] again to restore the display.
To dim the display panel
B
SC-AK500 SC-AK300
SC-AK200
Semi-Dim
Full-Dim
Restores the
original display
C
SC-AK490