background image

Before using

RQT6707

4

Batteries

The remote control

Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.

Keep the transmission window and the unit’s sensor free from dust.

Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.

Do not:

put heavy objects on the remote control.

take the remote control apart.

spill liquids onto the remote control.

Insert so the poles (+ and –) match those in the remote control.

Do not use rechargeable type batteries.

Do not:

mix old and new batteries.

use different types at the same time.

heat or expose to flame.

take apart or short-circuit.

attempt to recharge alkaline or manganese batteries.

use batteries if the covering has been peeled off.

keep together with metallic objects such as necklaces.

Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.

Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even
when held close to the front panel.

Use

R6, AA, UM-3

Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts.

(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or
web site (http://www.panasonic.com).

AC power supply cord .. 1 pc.
(RJA0065-1D)

Remote control
transmitter ..................... 1 pc.

(N2QAHB000036)

For U.S.A.:
• Black: (EUR7710010)
• Silver: (EUR7710020)
For Canada:
(EUR7710020)

(EUR7710010)

FM indoor antenna .. 1pc.
(RSA0006-J)

AM loop antenna .. 1 pc.
(N1DADYY00002)

Batteries ............. 2 pcs.
R6, AA, UM-3

Remote control

signal sensor

Transmission

window

About 7 meters in front of
the signal sensor

Supplied accessories

Placement of speakers

Place the front speakers so that the super tweeter is on the outside.

1

2

3

4

5

30 

˚

30 

˚

 

Note

Keep your speakers at least 10 mm (

13

/

32

˝) away from the system

for proper ventilation.

The front speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.

You cannot take the front net off the speakers.

Main unit

Front speaker
(left)

Front speaker
(right)

(SB-AK410)

Tweeter

(SB-AK610/
SB-AK510)

Super tweeter

Super tweeter

Tweeter

SC-AK610 SC-AK510

SC-AK410

SC-AK410

SC-AK610

SC-AK510

Place the front speakers so that the tweeter is on the outside.

Place on the floor or a sturdy shelf so that it won’t
cause vibration.
If irregular coloring occurs on your television
The subwoofer is designed to be used close to a
television, but the picture may be affected with
some televisions and set-up combinations.
If this occurs, turn the television off for about
30 minutes.
The television’s demagnetizing function should
correct the problem. If it persists, move the
speaker further away from the television.

(SB-WAK610)

(SB-AK610/
SB-AK510)

(SB-AK410)

SC-AK610

       only

 Subwoofer

SC-AK403

SC-AK403

Summary of Contents for SAAK403 - MINI HES W/CD PLAYER





















Reviews: