Precautions
Getting started
11
1
Use the measurements indicated below to identify the screwing positions on
the wall.
≥
Position the unit with at least 50 mm (2
q
) of space above the unit. If not, it may not be possible to access the buttons on this unit.
2
Attach the wall mount brackets to the wall.
≥
The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 33 k
g
(72.8 lbs).
≥
Be sure to use a spirit level to ensure that both screwing positions are horizontal to each other.
≥
Keep the screws out of reach of children to prevent swallowing.
≥
Keep the wall mount brackets out of reach of children to prevent swallowing.
3
Complete all the necessary connections to this unit. (
>
15 to 17)
≥
Connect the AC power supply cord to this unit, but do not connect it to the household AC outlet until the installation is completed.
4
Attach the rear pads to the rear of the unit.
≥
Keep the rear pads out of reach of children to prevent swallowing.
5
Attach a cord (not supplied) to 2 safety holders.
≥
Use a cord which is capable of supporting over 33 k
g
(72.8 lbs).
≥
Keep the safety holders out of reach of children to prevent swallowing.
A
Wall mount bracket
252 mm (9
29
/
32
)
257 mm (10
1
/
8
)
233.5 mm (9
13
/
64
)
275.5 mm (10
13
/
16
)
1018 mm (39
11
/
16
)
75 mm
(2
15
/
16
)
31.5 mm
(1
15
/
64
)
43.5 mm
(1
45
/
64
)
12.5 mm (
31
/
64
)
A
At least 30 mm
(1
3
/
16
q
)
B
‰
4.0 mm (
5
/
32
q
)
C
‰
7.5 mm to
‰
9.4 mm
(
19
/
64
q
to
3
/
8
q
)
D
Wall
E
Wall mount bracket
B
Wall mount bracket (supplied)
C
Screws (not supplied)
D
Rear pads (supplied)
E
Safety holder (supplied)
F
Cord (not supplied)
G
Thread a cord through the holes.
Refer to the Owner’s Manual of the cord
for details.
SC-HTB520PP_RQTX1278-Y.book Page 11 Friday, February 18, 2011 8:48 AM
