Reference
36
RQT7509
Recording
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment.
Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer
and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring
or distortion—and, most importantly, without affecting your sensitive hearing.
We recommend that you avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds
“normal” can actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you
listening for a lifetime.
EST. 1924
Listening caution
Maintenance
For a cleaner, crisper sound (cassette deck)
Clean the heads regularly to assure good quality playback and re-
cording. Use a cleaning tape (not included).
To clean this unit, wipe with a soft, dry cloth.
•
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
When moving the unit
1
Remove all discs.
2
Press [
/ I POWER] on the main unit to turn it off.
3
Disconnect the AC mains lead.
Troubleshooting guide
Television displays
•
You are trying to display incompatible contents.
•
Go to “Video” tab in the SETUP menus, and select “Enable” in “Progressive Out
(Component)”.
•
Go to “Display” tab in the SETUP menus, and select “On” for “On-Screen Messages”.
•
Go to “Disc” tab in the SETUP menus, and select the preferred language for “Menus”.
–
29
30
29
“Cannot display group xx, content xx.”
“The progressive out is set to
“Disable”.
No on-screen display.
The disc’s menu is displayed
in a different language.
