R
Q
T
805
2
33
You can set the timer to come on at a certain time to wake you up (play
timer) or to record a radio station or from the external source (record
timer).
The play and record timers cannot be used together.
Preparation
1
Switch on the unit and set the clock.
(
⇒
Setting the time, page 32)
2
For the play timer
Prepare the desired source (CD, SD, tape, radio, or external), and set
the volume.
For the record timer
– To record to SD:
Check the card’s write-protect switch (
⇒
To protect your data, page
7) and insert the card (
⇒
page 8).
To record to cassette tape:
Check the cassette’s erasure prevention tabs (
⇒
Erasure
prevention, page 25) and insert the tape (
⇒
page 19).
– Tune to the radio station (
⇒
page 22) or select the external source
(
⇒
page 35).
1
Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
z
PLAY: To set the play timer
z
REC: To set the record timer
2
Within 10 seconds:
Press [
u
2
/REW,
i
1
/FF] to set the day and
press [LIST/ENTER].
Every time you press the button:
: For the play timer only
3
ON time setting
Press [
u
2
/REW,
i
1
/FF] to set the start time
and press [LIST/ENTER].
4
OFF time setting
Press [
u
2
/REW,
i
1
/FF] to set the finish time
and press [LIST/ENTER].
The start and finish times are now set.
5
Press [
z
PLAY/REC] to display the timer indicator.
z
PLAY: To turn the play timer on
z
REC-SD: To turn the record timer on (Recording to SD)
z
REC-TAPE: To turn the record timer on (Recording to cassete tape)
(The indicator doesn’t appear if the start and finish times or the clock
have not been set.)
6
Press [
^
] to turn the unit off.
The unit must be off for the timers to operate.
•
Play timer:
Play will start in the set condition at the set time with
volume increasing gradually to the set level.
•
Record timer:
The unit comes on 30 seconds before the set time
with the volume muted.
To cancel the timer
Press [
z
PLAY/REC] to select “TIMER OFF”.
(The timer comes on at the set time everyday if the timer is on.)
To check the settings
Press [CLOCK/TIMER] while the unit is on to select “
z
PLAY” or
“
z
REC”.
To check the settings while the unit is off
Press [CLOCK/TIMER].
If you use the unit after the timers are set
After using, check that the correct disc, card or tape is loaded before
turning the unit off.
(when the unit is on)
To change the play/record times
Do steps 1, 2, 3, 4 and 6. (
⇒
left)
To change the source or volume
1. Press [
z
PLAY/REC] to clear the timer indicator from the display.
2. Make changes to the source or volume. (
⇒
left, Preparation)
3. Do steps 5 to 6.(
⇒
left)
To change the timer
Press [
z
PLAY/REC] to select the desired timer.
Every time the button is pressed:
Note
•
If you turn the unit off and on again while a timer is functioning, the finish
time setting will not be activated.
•
If you selected AUX as the source, when the timer comes on, the unit
turns on and engages “AUX” as the source. If you want to playback or
record from a connected unit, set that unit’s timer to the same time. (See
the connected unit’s operating instructions.)
Show various types of information during play or recording.
Press [DISPLAY, –DIMMER].
•
Items shown differ depending on the current operation and sound
source.
Use this when you are going to sleep or any other time you would prefer to
dim the display panel.
Press and hold [DISPLAY, –DIMMER].
To return to the original brightness, press and hold [DISPLAY, –DIMMER]
again.
The play/record timer
Original display
Changing the timer settings
Displaying information
Dimming the display
Con
ven
ient func
tions
Summary of Contents for SAPM71SD - MINI HES W/CD PLAYER
Page 43: ...RQT8052 43 Reference ...
