21
RQT8043
RQTX0202
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
ESPAÑOL
Using other optional equipments
Note:
All peripheral components and cables are sold
separately.
Avoid interfering with other
Avoid interfering with other
Panasonic equipment
Panasonic equipment
Other Panasonic audio or video equipment may
start functioning when you operate the unit using the
supplied remote control.
You can operate this unit in another mode by setting
the remote control operating mode to “REMOTE 2”.
The main unit and remote control must be set to
the same mode.
1
Press and hold [MUSIC P./ AUX] on the
main unit and [2] on the remote control
until the main unit’s display shows
“REMOTE 2”.
2
Press and hold [ OK] and [ 2] on the remote
control for at least 2 seconds.
To change the mode back to “REMOTE 1”, repeat
both steps above by replacing [2] with [1].
Connecting to a portable audio
Connecting to a portable audio
equipment
equipment
This feature enables you to enjoy music from a
portable audio equipment.
Audio cord
(not included)
Portable audio
equipment (not included)
Playing or recording from a portable
audio equipment
Switch off the equaliser function (if there is any) of
the portable audio equipment before you plug into
the MUSIC PORT jack. Otherwise, sound from the
speaker may be distorted.
1
Plug the audio cord into the MUSIC PORT
jack.
2
Press [
MUSIC P.] (main unit: [MUSIC P./
AUX]) to select “MUSIC PORT”.
For listening :
Proceed to step 3.
For recording :
Press [
¶
REC] and [TAPE]
consecutively (main unit:
[
¶
REC, TAPE]) to start
recording.
3
Play the portable audio equipment. (See
the portable audio equipment’s instruction
manual.)
rqtx0202-B(en).indd 21
rqtx0202-B(en).indd 21
1/13/09 1:56:04 PM
1/13/09 1:56:04 PM