RQTX1298
8
8
E
N
G
L
IS
H
ENGL
ISH
Discs
Playing discs
1
Press [
x
, OPEN/CLOSE] on the main unit to open the disc
tray.
Put in a disc with the label facing up.
Press [
x
, OPEN/CLOSE] again to close the disc tray.
2
Press [CD] and then press [
4
/
9
] to start playback.
Stop
playback
Press [
8
] during playback.
Pause
playback
Press [
4
/
9
] during playback.
Press again to continue playback.
Skip album
Press [
R
,
T
].
Skip track
Press [
2
] or [
6
] (main unit: [
2
/
3
] or
[
5
/
6
]).
Search
through
track
Press and hold [
3
] or [
5
] (main unit: [
2
/
3
]
or [
5
/
6
]).
Playmode function
1
Press [PLAY MENU] to select “PLAYMODE”.
2
Press [
Y
,
U
] and then press [OK] to select the desired mode.
OFF
PLAYMODE
Play all tracks.
1-TRACK
1-TR
Play one selected track on the disc.
Press the alphanumeric buttons to select the track.
Playback starts from the selected track.
1-ALBUM
1-ALB
Play one selected album on the disc.
Press [
R
,
T
] to select the album.
RANDOM
RND
Play a disc randomly.
1- ALBUM
RANDOM
1-ALB RND
Play all tracks in one selected album randomly.
Press [
R
,
T
] to select the album.
Note:
• This function does not work with “Program playback”.
• The setting returns to the default “OFF PLAYMODE” when you open
the disc tray.
Repeat playback
You can repeat “Program playback” or other selected “Playmode
function”.
1
Press [PLAY MENU] to select “REPEAT”.
2
Press [
Y
,
U
] to select “ON REPEAT” and then press [OK].
“
” is shown.
To cancel, select “OFF REPEAT”.
Viewing available information
You can view the available information on the display panel.
Press [DISPLAY].
Note:
• Maximum characters that can be shown: approximately 32
• This system supports ver. 1.0 and 1.1 ID3 tags.
• Text data that the system does not support can show differently.
Program playback
This function allows you to program up to 24 tracks.
1
Press [PROGRAM] in the stop mode.
“PGM” is shown.
2
Press the alphanumeric buttons to select the desired track.
Do this step again to program other tracks.
3
Press [
4
/
9
] to start playback.
1
Press [PROGRAM] in the stop mode.
2
Press [
R
,
T
] to select the desired album.
3
Press [
6
] and then press the alphanumeric buttons to select
the desired track.
4
Press [OK].
Do steps 2 through 4 again to program other tracks.
5
Press [
4
/
9
] to start playback.
Cancel
program mode
Press [PROGRAM] in the stop mode.
Replay the
program
Press [PROGRAM] and then press [
4
/
9
].
Check program
contents
Press [
2
] or [
6
] when “PGM” is shown in the
stop mode.
To check while programming, press [PROGRAM]
two times after “PGM” is shown, then press [
2
]
or [
6
].
Clear the last
track
Press [DEL] in the stop mode.
Clear all
programmed
tracks
Press [
8
] in the stop mode. “CLR ALL” is shown.
Within 5 seconds, press [
8
] again.
Note:
The program memory is cleared when you open the disc tray.
Note on CDs
• This system can access up to 99 tracks.
• This system can play MP3 files and CD-DA format audio CD-R/RW
that have been finalised.
• This system can fail to play some CD-R/RW because of the condition
of the recording.
Note on MP3s
• Files are treated as tracks and folders are treated as albums.
• This system can access up to 999 tracks, 255 albums and 20
sessions.
• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
• To play in a certain order, prefix the folder and file names with 3-digit
numbers in the order you want them to play.
Limitations on MP3 playback
• If you have recorded MP3s on the same disc as CD-DA, only the
format recorded in the first session can be played.
• Some MP3s cannot be played because of the condition of the disc or
recording.
• Recordings will not necessarily be played in the order you recorded
them.
SC-AKX52_EG_en.indd 8
SC-AKX52_EG_en.indd 8
3/4/2011 2:12:52 PM
3/4/2011 2:12:52 PM
