10
T
Q
BJ
227
2
10
Preparing media
Disc
1
Press [
x
] to open the disc tray.
Put in a disc with the label facing up.
Press again to close the disc tray.
2
Press [SELECT <, >] repeatedly to select “CD”.
USB
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
1
Decrease the volume and connect the USB device
to the USB port.
Hold the main unit when connecting or disconnecting
the USB device.
2
Press [SELECT <, >] repeatedly to select “USB A”
or “USB B”.
USB status indicator lights up in red when selected.
Note:
• Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
• Some devices cannot be charged as the maximum USB
charging current is 0.5 A only.
Bluetooth
®
You can connect and play an audio device wirelessly
through Bluetooth
®
.
Preparation
• Switch on the main unit.
• Switch on the Bluetooth
®
feature of the device and put
the device near the system.
• Read the operating instructions of the device for details.
█
Pairing a device
1
Press [ ].
If “PAIRING” is shown, continue with step 3.
2
Press [PLAY MENU] to select “PAIRING” and then
press [OK].
3
Select “SC-AKX520” or “SC-AKX320” from the
Bluetooth
®
menu of the device.
If prompted for a passkey, input “0000” or “1234”.
The device connects with this system automatically
after pairing is complete.
The MAC address (example: 6C:5A:B5:B3:1D:0F)
may be shown before “SC-AKX520” or “SC-AKX320”
is shown.
The name of the connected device is shown for a few
seconds.
Using the main unit
1
Press and hold [ ] until “PAIRING” is shown.
2
Select “SC-AKX520” or “SC-AKX320” from the
Bluetooth
®
menu of the device.
Note:
• You can pair up to 8 devices with this system. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
• Depending on the searching functionality of the Bluetooth
®
device and the surrounding environment, if the product
name is not shown on the Bluetooth
®
menu of the device,
switch off and then switch on the Bluetooth
®
feature of the
device repeatedly during the pairing process.
█
Connecting a device
1
Press [ ].
“BLUETOOTH READY” is shown.
2
Select “SC-AKX520” or “SC-AKX320” from the
Bluetooth
®
menu of the device.
The name of the connected device is shown for a few
seconds.
3
Start playback on the device.
Note:
• A device must be paired to connect.
• When “BLUETOOTH” is selected as the source, this system
will automatically try to connect to the last connected device.
(“LINKING” is shown during this process.)
█
Multi Connect
[AKX520]
This system supports Multi Connect, which can connect
up to 3 devices simultaneously.
To switch between the connected devices
When one of the connected devices is playing, you can
easily switch control to another connected device simply
by starting a playback on that device. The previous
playback will be paused automatically.
Note:
This function may not work for some apps or devices
(depending on app or device specifications).
[AKX320]
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
11).
[AKX320]
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
~
11).
