Getting s
tar
te
d
17
VQT3X51
Inserting or removing
media
≥
When inserting a media item, ensure that it is
facing the right way up.
≥
When removing the SD card, press the center
of the card and pull it straight out.
≥
If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥
Use the front USB port when you connect a
iPod/iPhone, USB memory or a USB HDD. The
USB port on the rear panel is for the
Communication Camera and the Wireless LAN
Adaptor DY-WL5 (optional).
Enjoying TV with unit’s
speakers
1
Connect the TV and the main unit. (
>
12)
2
Press [EXT-IN] several times to select the
appropriate external input mode.
(
>
18)
≥
Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
1
Press and hold [
j
AUDIO] to activate the
audio setting mode.
2
Press [
j
AUDIO] several times to select
the audio. (MAIN, SAP)
≥
Set “PCM-FIX” (
>
33) to “Off”.
≥
“SAP” (Secondary Audio Program) only
works with Dolby Dual Mono.
≥
You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SD CARD
iPod
VOL
OPEN/CLOSE
*
* (For details
>
22)
Selecting the type of audio
SC-BTT190P_eng.book 17 ページ 2012年2月20日 月曜日 午後5時5分