12
VQT4Z38
2
Insert the speaker cable through the speaker base and connect the speaker cables.
3
Attach the speaker base to the front speaker.
Red connector:
The speaker attached to the
red
connector cable is to be place on the
right
side.
White connector:
The speaker attached to the
white
connector cable is to be place on the
left
side.
Thread the speaker cable
through the base and the
hole in the speaker.
3
Connect the speaker cables to the speakers. (
>
14)
4
After connecting the speaker cable, press the cable into the groove.
* If you have difficulty inserting the cable, try straightening the speaker cable and then bending the cable about 20
mm from the tip, at an angle of approx. 45
o
.
Tighten the screw (supplied)
securely.
Slide the speaker
cable into the
groove.
SC-BTT230EB-VQT4Z38_mst.book 12 ページ 2013年3月19日 火曜日 午前9時27分